/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Daniel Glazman <glazman@netscape.com>
 *   Akkana Peck <akkana@netscape.com>
 *   Kathleen Brade <brade@netscape.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"
#include "domstubs.idl"

interface nsIAtom;
interface nsIContent;
interface nsISupportsArray;
interface nsISelection;
interface nsIContentFilter;

%{C++
#define NS_EDITOR_ELEMENT_NOT_FOUND \
  NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_EDITOR, 1)

%}
[scriptable, uuid(833f30de-94c7-4630-a852-2300ef329d7b)]

interface nsIHTMLEditor : nsISupports
{
%{C++
  typedef short EAlignment;
%}

  // used by GetAlignment()
  const short eLeft = 0;
  const short eCenter = 1;
  const short eRight = 2;
  const short eJustify = 3;
  
  
  /* ------------ Inline property methods -------------- */


  /**
   * AddDefaultProperty() registers a default style property with the editor
   *
   * @param aProperty   the property to set by default
   * @param aAttribute  the attribute of the property, if applicable.
   *                    May be null.
   *                    Example: aProperty="font", aAttribute="color"
   * @param aValue      if aAttribute is not null, the value of the attribute.
   *                    Example: aProperty="font", aAttribute="color",
   *                             aValue="0x00FFFF"
   */
  void addDefaultProperty(in nsIAtom aProperty, 
                          in AString aAttribute, 
                          in AString aValue);

  /**
   * RemoveDefaultProperty() unregisters a default style property with the editor
   *
   * @param aProperty   the property to remove from defaults
   * @param aAttribute  the attribute of the property, if applicable.
   *                    May be null.
   *                    Example: aProperty="font", aAttribute="color"
   * @param aValue      if aAttribute is not null, the value of the attribute.
   *                    Example: aProperty="font", aAttribute="color",
   *                             aValue="0x00FFFF"
   */
  void removeDefaultProperty(in nsIAtom aProperty, 
                             in AString aAttribute, 
                             in AString aValue);

  /**
   * RemoveAllDefaultProperties() unregisters all default style properties with the editor
   *
   */
  void removeAllDefaultProperties();

  /**
   * SetInlineProperty() sets the aggregate properties on the current selection
   *
   * @param aProperty   the property to set on the selection 
   * @param aAttribute  the attribute of the property, if applicable.
   *                    May be null.
   *                    Example: aProperty="font", aAttribute="color"
   * @param aValue      if aAttribute is not null, the value of the attribute.
   *                    May be null.
   *                    Example: aProperty="font", aAttribute="color",
   *                             aValue="0x00FFFF"
   */
  void setInlineProperty(in nsIAtom aProperty, 
                         in AString aAttribute,
                         in AString aValue);

  /**
   * getInlineProperty() gets aggregate properties of the current selection.
   * All object in the current selection are scanned and their attributes are
   * represented in a list of Property object.
   *
   * @param aProperty   the property to get on the selection 
   * @param aAttribute  the attribute of the property, if applicable.
   *                    May be null.
   *                    Example: aProperty="font", aAttribute="color"
   * @param aValue      if aAttribute is not null, the value of the attribute.
   *                    May be null.
   *                    Example: aProperty="font", aAttribute="color",
   *                             aValue="0x00FFFF"
   * @param aFirst      [OUT] PR_TRUE if the first text node in the
   *                          selection has the property
   * @param aAny        [OUT] PR_TRUE if any of the text nodes in the
   *                          selection have the property
   * @param aAll        [OUT] PR_TRUE if all of the text nodes in the
   *                          selection have the property
   */
  void getInlineProperty(in nsIAtom aProperty, 
                         in AString  aAttribute,
                         in AString  aValue,
                         out boolean aFirst,
                         out boolean aAny,
                         out boolean aAll);

  AString getInlinePropertyWithAttrValue(in nsIAtom aProperty, 
                                           in AString  aAttribute,
                                           in AString  aValue,
                                           out boolean aFirst,
                                           out boolean aAny,
                                           out boolean aAll);
                             
  /**
   * removeAllInlineProperties() deletes all the inline properties from all 
   * text in the current selection.
   */
  void removeAllInlineProperties();


  /**
   * removeInlineProperty() deletes the properties from all text in the current
   * selection.  If aProperty is not set on the selection, nothing is done.
   *
   * @param aProperty   the property to remove from the selection 
   *                    All atoms are for normal HTML tags (e.g.:
   *                    nsIEditorProperty::font) except when you want to
   *                    remove just links and not named anchors.
   *                    For that, use nsIEditorProperty::href
   * @param aAttribute  the attribute of the property, if applicable.
   *                    May be null.
   *                    Example: aProperty=nsIEditorProptery::font,
   *                    aAttribute="color"
   *                    nsIEditProperty::allAttributes is special.
   *                    It indicates that all content-based text properties
   *                    are to be removed from the selection.
   */
  void removeInlineProperty(in nsIAtom aProperty, in AString  aAttribute);

  /**
   *  Increase font size for text in selection by 1 HTML unit
   *  All existing text is scanned for existing <FONT SIZE> attributes
   *  so they will be incremented instead of inserting new <FONT> tag
   */
  void increaseFontSize();

  /**
   *  Decrease font size for text in selection by 1 HTML unit
   *  All existing text is scanned for existing <FONT SIZE> attributes
   *  so they will be decreased instead of inserting new <FONT> tag
   */
  void decreaseFontSize();

  /* ------------ HTML content methods -------------- */

  /**
   * Tests if a node is a BLOCK element according the the HTML 4.0 DTD.
   *   This does NOT consider CSS effect on display type
   *
   * @param aNode      the node to test
   */
  boolean nodeIsBlock(in nsIDOMNode node);

  /**
   * Insert some HTML source at the current location
   *
   * @param aInputString   the string to be inserted
   */
  void insertHTML(in AString aInputString);


  /** 
    * Paste the text in the OS clipboard at the cursor position, replacing
    * the selected text (if any), but strip out any HTML styles and formatting
    */
  void pasteNoFormatting(in long aSelectionType);

  /** 
   *  Rebuild the entire document from source HTML
   *  Needed to be able to edit HEAD and other outside-of-BODY content
   *
   *  @param aSourceString   HTML source string of the entire new document
   */
  void rebuildDocumentFromSource(in AString aSourceString);

  /**
   * Insert some HTML source, interpreting
   * the string argument according to the given context.
   *
   * @param aInputString   the string to be inserted
   * @param aContextStr    Context of insertion
   * @param aInfoStr       Related info to aInputString 
   * @param aFlavor        Transferable flavor, can be ""
   * @param aSourceDoc          document where input was dragged from (may be null)
   * @param aDestinationNode    location for insertion (such as when dropped)
   * @param aDestinationOffset  used with aDestNode to determine insert location
   * @param aDeleteSelection    used with aDestNode during drag&drop 
   * @param aCollapseSelection  used with aDestNode during drag&drop
   */
  void insertHTMLWithContext(in AString aInputString,
                             in AString aContextStr,
                             in AString aInfoStr,
                             in AString aFlavor,
                             in nsIDOMDocument aSourceDoc,
                             in nsIDOMNode aDestinationNode,
                             in long aDestinationOffset,
                             in boolean aDeleteSelection);


  /** 
    * Insert an element, which may have child nodes, at the selection
    * Used primarily to insert a new element for various insert element dialogs,
    *   but it enforces the HTML 4.0 DTD "CanContain" rules, so it should
    *   be useful for other elements.
    *
    * @param aElement           The element to insert
    * @param aDeleteSelection   Delete the selection before inserting
    *     If aDeleteSelection is PR_FALSE, then the element is inserted 
    *     after the end of the selection for all element except
    *     Named Anchors, which insert before the selection
    */  
  void insertElementAtSelection(in nsIDOMElement aElement,
                                in boolean aDeleteSelection);

  /** 
   *   Set the documents title.
   */
  void setDocumentTitle(in AString aTitle);

  /** 
   *   Set the BaseURL for the document to the current URL
   *     but only if the page doesn't have a <base> tag
   *   This should be done after the document URL has changed,
   *     such as after saving a file
   *   This is used as base for relativizing link and image urls
   */
  void updateBaseURL();


  /* ------------ Selection manipulation -------------- */
  /* Should these be moved to nsISelection? */
  
  /** 
    * Set the selection at the suppled element
    *
    * @param aElement   An element in the document
    */
  void selectElement(in nsIDOMElement aElement);

  /** 
    * Create a collapsed selection just after aElement
    * 
    * XXX could we parameterize SelectElement(before/select/after>?
    *
    * The selection is set to parent-of-aElement with an
    *   offset 1 greater than aElement's offset
    *   but it enforces the HTML 4.0 DTD "CanContain" rules, so it should
    *   be useful for other elements.
    *
    * @param aElement  An element in the document
    */
  void setCaretAfterElement(in nsIDOMElement aElement);

  /**
   * SetParagraphFormat       Insert a block paragraph tag around selection
   * @param aParagraphFormat  "p", "h1" to "h6", "address", "pre", or "blockquote"
   */
  void setParagraphFormat(in AString aParagraphFormat);

  /**
   * getParagraphState returns what block tag paragraph format is in
   * the selection.
   * @param aMixed     True if there is more than one format
   * @return           Name of block tag. "" is returned for none.
   */
  AString getParagraphState(out boolean aMixed);

  /** 
   * getFontFaceState returns what font face is in the selection.
   * @param aMixed    True if there is more than one font face
   * @return          Name of face.  Note: "tt" is returned for
   *                  tt tag.  "" is returned for none.
   */
  AString getFontFaceState(out boolean aMixed);
  
  /** 
   * getFontColorState returns what font face is in the selection.
   * @param aMixed     True if there is more than one font color
   * @return           Color string. "" is returned for none.
   */
  AString getFontColorState(out boolean aMixed);

  /** 
   * getFontColorState returns what font face is in the selection.
   * @param aMixed     True if there is more than one font color
   * @return           Color string. "" is returned for none.
   */
  AString getBackgroundColorState(out boolean aMixed);

  /** 
   * getHighlightColorState returns what the highlight color of the selection.
   * @param aMixed     True if there is more than one font color
   * @return           Color string. "" is returned for none.
   */
  AString getHighlightColorState(out boolean aMixed);

  /** 
   * getListState returns what list type is in the selection.
   * @param aMixed    True if there is more than one type of list, or
   *                  if there is some list and non-list
   * @param aOL       The company that employs me.  No, really, it's 
   *                  true if an "ol" list is selected.
   * @param aUL       true if an "ul" list is selected.
   * @param aDL       true if a "dl" list is selected.
   */
  void getListState(out boolean aMixed, out boolean aOL, out boolean aUL,
                    out boolean aDL);
  
  /** 
   * getListItemState returns what list item type is in the selection.
   * @param aMixed    True if there is more than one type of list item, or
   *                  if there is some list and non-list
   * @param aLI       true if "li" list items are selected.
   * @param aDT       true if "dt" list items are selected.
   * @param aDD       true if "dd" list items are selected.
   */
  void getListItemState(out boolean aMixed, out boolean aLI,
                        out boolean aDT, out boolean aDD);
  
  /** 
   * getAlignment     returns what alignment is in the selection.
   * @param aMixed    True if there is more than one type of list item, or
   *                  if there is some list and non-list
   * @param aAlign    enum value for first encountered alignment
   *                  (left/center/right)
   */
  void getAlignment(out boolean aMixed, out short aAlign);
  
  /**
   * Document me!
   * 
   */
  void getIndentState(out boolean aCanIndent, out boolean aCanOutdent);

  /**
   * Document me!
   * 
   */
  void makeOrChangeList(in AString aListType, in boolean entireList,
                        in AString aBulletType);

  /**
   * Document me!
   * 
   */
  void removeList(in AString aListType);

  /**
   * Document me!
   * 
   */
  void indent(in AString aIndent);

  /**
   * Document me!
   * 
   */
  void  align(in AString aAlign);

  /** 
   * Return the input node or a parent matching the given aTagName,
   *   starting the search at the supplied node.
   * An example of use is for testing if a node is in a table cell
   *   given a selection anchor node.
   *
   * @param aTagName  The HTML tagname
   *  Special input values:
   *    Use "href" to get a link node 
   *      (an "A" tag with the "href" attribute set)
   *    Use "anchor" or "namedanchor" to get a named anchor node
   *      (an "A" tag with the "name" attribute set)
   *    Use "list" to get an OL, UL, or DL list node
   *    Use "td" to get either a TD or TH cell node
   *
   * @param aNode    The node in the document to start the search.
   *     If it is null, the anchor node of the current selection is used.
   * @return         NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found
   *                 (passes NS_SUCCEEDED macro)
   */
  nsIDOMElement getElementOrParentByTagName(in AString aTagName,
                                            in nsIDOMNode aNode);

  /** 
   * Return an element only if it is the only node selected,
   *    such as an image, horizontal rule, etc.
   * The exception is a link, which is more like a text attribute:
   *    The Anchor tag is returned if the selection is within the textnode(s)
   *    that are children of the "A" node.
   *    This could be a collapsed selection, i.e., a caret
   *    within the link text.
   *
   * @param aTagName  The HTML tagname or and empty string 
   *       to get any element (but only if it is the only element selected)
   *    Special input values for Links and Named anchors:
   *    Use "href" to get a link node
   *      (an "A" tag with the "href" attribute set)
   *    Use "anchor" or "namedanchor" to get a named anchor node
   *      (an "A" tag with the "name" attribute set)
   * @return          NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found
   *                  (passes NS_SUCCEEDED macro)
   */
  nsIDOMElement getSelectedElement(in AString aTagName);

  /** 
   * Output the contents of the <HEAD> section as text/HTML format
   */
  AString getHeadContentsAsHTML();

  /** 
   * Replace all children of <HEAD> with string of HTML source
   */
  void replaceHeadContentsWithHTML(in AString aSourceToInsert);

  /** 
   * Return a new element with default attribute values
   * 
   * This does not rely on the selection, and is not sensitive to context.
   * 
   * Used primarily to supply new element for various insert element dialogs
   *  (Image, Link, NamedAnchor, Table, and HorizontalRule 
   *   are the only returned elements as of 7/25/99)
   *
   * @param aTagName  The HTML tagname
   *    Special input values for Links and Named anchors:
   *    Use "href" to get a link node
   *      (an "A" tag with the "href" attribute set)
   *    Use "anchor" or "namedanchor" to get a named anchor node
   *      (an "A" tag with the "name" attribute set)
   * @return          The new element created.
   */
  nsIDOMElement createElementWithDefaults(in AString aTagName);

  /** 
   * Insert an link element as the parent of the current selection
   *
   * @param aElement   An "A" element with a non-empty "href" attribute
   */
  void insertLinkAroundSelection(in nsIDOMElement aAnchorElement);

  /** 
   * Set the value of the "bgcolor" attribute on the document's <body> element
   *
   * @param aColor  The HTML color string, such as "#ffccff" or "yellow"
   */
  void setBackgroundColor(in AString aColor);


  /** 
   * Set an attribute on the document's <body> element
   *    such as text, link, background colors
   *
   * 8/31/00 THIS ISN'T BEING USED? SHOULD WE DROP IT?
   *
   * @param aAttr   The attribute to be set
   * @param aValue  The value of the attribute
   */
  void setBodyAttribute(in AString aAttr, in AString aValue);
  
  /**
   * Find all the nodes in the document which contain references
   * to outside URIs (e.g. a href, img src, script src, etc.)
   * The objects in the array will be type nsIURIRefObject.
   *
   * @return aNodeList    the linked nodes found
   */
  nsISupportsArray getLinkedObjects();

  /** 
   * A boolean which is true is the HTMLEditor has been instantiated
   * with CSS knowledge and if the CSS pref is currently checked
   *
   * @return    true if CSS handled and enabled
   */
  attribute boolean isCSSEnabled;

  /**
   * Add listener for insertion override
   * @param inFilter  function which callers want called during insertion
   */
  void addInsertionListener(in nsIContentFilter inFilter);

  /**
   * Remove listener for insertion override
   * @param inFilter  function which callers do not want called during insertion
   */
  void removeInsertionListener(in nsIContentFilter inFilter);

  /**
   * Returns an anonymous nsDOMElement of type aTag,
   * child of aParentNode. If aIsCreatedHidden is true, the class
   * "hidden" is added to the created element. If aAnonClass is not
   * the empty string, it becomes the value of the attribute "_moz_anonclass"
   * @return a DOM Element
   * @param aTag             [IN] a string representing the desired type of
   *                              the element to create
   * @param aParentNode      [IN] the parent node of the created anonymous
   *                              element
   * @param aAnonClass       [IN] contents of the _moz_anonclass attribute
   * @param aIsCreatedHidden [IN] a boolean specifying if the class "hidden"
   *                              is to be added to the created anonymous
   *                              element
   */
  nsIDOMElement createAnonymousElement(in AString aTag, in nsIDOMNode aParentNode,
                                       in AString aAnonClass, in boolean aIsCreatedHidden);

  /**
   * returns the deepest container of the selection
   * @return a DOM Element
   */
  nsIDOMElement getSelectionContainer();

  /**
   * Checks if the anonymous nodes created by the HTML editor have to be
   * refreshed or hidden depending on a possible new state of the selection
   * @param aSelection [IN] a selection
   */
  void checkSelectionStateForAnonymousButtons(in nsISelection aSelection);

  boolean isAnonymousElement(in nsIDOMElement aElement);

  /**
   * A boolean indicating if a return key pressed in a paragraph creates
   * another paragraph or just inserts a <br> at the caret
   *
   * @return    true if CR in a paragraph creates a new paragraph
   */
  attribute boolean returnInParagraphCreatesNewParagraph;

  /**
   * Checks whether a BR node is visible to the user.
   */
  boolean breakIsVisible(in nsIDOMNode aNode);

  /**
   * Get an active editor's editing host in DOM window.  If this editor isn't
   * active in the DOM window, this returns NULL.
   */
  [noscript, notxpcom] nsIContent GetActiveEditingHost();
};

